Groundwater
Pumps
Sampling Pneumatic Pumps |
|
Our
sampling pumps operate on compressed air. Compared to electric pumps,
these can create less disturbance in the well, and require less maintenance
and field downtime.
Package your sampling kit with pump,
compressor and tubing.
|
|
RENTAL GUARANTEE
Our pumps are CLEANED & CHECKED |
|
|
QSP6P
|
|
QED Sample-Pro Pump
MicroPurgeŽ Bladder pump with external
controllerThe ultimate in
MicropurgeŽ sampling with a portable pump. Read more about the
benefits of low flow sampling
here.
- Stainless steel casing , twist apart for
easy field cleaning
- Disposable bladders, installation in 1-2
minutes, low cost components for fast field
- Disposable bladders minimise well cross
contamination and contaminated samples
- Depth to 76 meters (with a 120psi
compressor)
- Pump Dimensions, 45 mm x 370 mm
- Hose size, Air inlet 6 mm OD, discharge,
10 mmOD
- Weight, Pump, 1 kg, controller, 3 kg.
- Controller dimensions, 20 x 18 x 15 cm
- Air consumption rate, <1 cfm
- Pressure 10 psi + 1.5 psi per meter of
lift
- Requires hosing and compressed air
source
|
|
|
|
|
|
Rental Rates
Purchase
Information |
|
|
|
|
BEN1800-7 |
|
Bennett Sample Pump
Simple to use auto pump
- Ideal for deep pumping in
50mm bores
- Air-Driven mechanical
piston pump - air does not contact the sample.
- Will lift up to 170m
(Model 1800-7).
- Pump OD: 46mm.
- Pump Length: 600mm
- Pump weight: 6kg
- Flow rate: 0 to 5.9Lpm (at
0m head).
- Requires compressed air
source and hosing.
- Requires 5.2cfm @ 140psi
to pump 274m head.
- Hosing: air supply 3/8" OD
plastic hose; air vent 3/8" OD plastic hose; water discharge 1/2" OD
plastic hose.
|
|
|
|
|
|
Rental Rates
Purchase
Information |
|
|
|
|
TA4101 |
|
Thomas TA4101 REC 12V Compressor
Powerful and light weight
This 12 volt compressor is powerful enough to
drive most pneumatic pumps at a modest flow rate down to depths of 45
meters.
- Very portable, 12 volt supply - connect to
the battery of a running motor vehicle.
- Light weight, easy to carry
- Provides the reliability associated with
pneumatic pumps. Ensures you will be able to sample/purge
your bores every time and not have breakdowns usually associated
with electric pumps.
- Oil-less operation means no maintenance
required.
- Flow Rate - 1 cfm @ 100 psi, 2.3cfm at
open flow
- Power Requirements 12 volt
Maximum current 46 amps
- Air discharge port size 6 mm
- Type
Oil free operation
- Dimensions (not
mounted on platform) 150 x 250 x 370 mm
- Weight
14 kg
|
|
|
|
|
|
Rental Rates |
|
|
|
|
LDPE Tubing is available for purchase |
|
|
|
|
