|
|
|
The
robust design of the GeoprobeŽ Model 6620DT direct push machine has
head's turning every time its tracks touch ground! One reason is the
completeness of the package. From auxiliary power sources, a workhorse
hammer, and a well-planned work area to an impressive list of optional
equipment that makes it easy to offer more services to your customers,
the Model 6620DT is very attractive to customers and very productive.
Wider
tracks and a heavy-duty undercarriage provide the foundation for the
Model 6620DT's robust design. The stronger, wider undercarriage allows
this direct push machine to be used on concrete or pavement, and
enables the machine to readily negotiate in tight, confining work
areas and on offroad, rugged terrain. The machine has 12-inch tracks.
The overall width of the machine has increased from 48 inches to 60
inches which means the undercarriage can provide a more stable base
for probing and drilling operations. The added strength of the
undercarriage also means you can equip your machine for augering, add
a winch to help with tool placement and tripping, or operate the DH66
Auto Drop SPT Hammer for geotechnical applications. It's uniquely
flexible to switch from environmental to geotechnical work with little
time and effort.
Top
ground speed of the Model 6620DT was bumped to 4.5 mph, an increase of
over 2 mph faster than the 6610DT. The overall ground speed of the
6620DT ranges from a crawl, for close maneuvering, to the 4.5 mph for
field movement.
A
two-speed pull cylinder on the Model 6620DT at low speed (full pulling
power) will pull rods full stroke (66 inches) in eleven seconds. On
high speed, the machine can cycle from bottom to top in less than 5
seconds.
Other
features on the machine include a wireless remote control, onboard
tool storage, and an easily accessible engine compartment for quick
daily systems checks so you can focus your field time on field work
and not maintenance.
Model 6620DT Features:
- 66-inch (1676 mm) probe cylinder stroke allows use of 5-foot (1,5 m) probe rods
- 21 ton (187 kN) pulling capacity for today's larger sampling tools and deeper depths
- Equipped with the powerful GH60 Soil Probing Hammer, exclusively from Geoprobe® Systems
- Wireless remote control
- Built-in rotary spindle for concrete drilling, augering, and anchoring
- Two-speed probe cylinder cycles from bottom to top in less than 5 seconds
- Independently driven rubber tracks
- Powered by a four-cylinder, 54 HP, liquid-cooled Kubota turbo diesel engine
- Hydraulic movement in all three axes allows easy probe alignment with tool string
- Auxiliary hydraulic ports provide power for remote equipment
- Compatible with Geoprobe® brand Tooling and Logging Equipment
|
