Aqua-CPA |
|
Aqua - CPA Conductivity/TDS/Salinity/pH & Temperature Meter |
|
|
|
The Australian Made Aqua Cond/pH is a NEW economical, waterproof handheld
pH, Cond., Salinity and Temperature meter.
It provides accurate, reliable measurements,
and is very easy to use. Genuine one-touch calibration puts an end to
time-consuming calibration procedures. The Aqua Cond/pH comes with all the
accessories needed for immediate use.
Rugged & Waterproof
Tough enclosure fully waterproof to
an IP65 rating and the connectors, IP65. Designed for the harshest field and
industrial environment.
One-touch Calibration
Calibration of the Aqua Cond/pH could
not be simpler. Just place the electrode into any of the pre-selected
solution and press the Calibrate key. Repeat for a second point and that's
it!
Low Battery Drain
The Aqua Cond/pH will provide in
excess of 70 hours of continuous use with an 9V battery. A battery-saver
function switches the meter off after 5 minutes
|
|
|
|
| Specifications: |
|
|
|
|
pH: |
Range: 0 to 14 pH
Resolution: 0.01 pH
Accuracy: +/-0.01pH |
|
|
|
| Temperature: |
Range -10 to 60°C
Resolution : 0.1 °C
Accuracy : +/-0.2 °C |
|
|
|
|
Conductivity: |
k=0.1 sensor - Range: 0 to
2000 µS/cm
k=1.0 sensor - Range: 0 to 20.00 mS/cm
k=10 sensor - Range: 0 to 200.0 mS/cm
Resolution: 0.1 mS/cm
Accuracy: 0.2% of full scale at 25°C |
|
|
|
| Salinity: |
k=1.0 sensor - Range: 0 to
1000 ppM
k= 1.0 sensor - Range: 0 to 10.00 ppK
k= 10 sensor - Range: 0 to 100.0 ppK
Resolution: 0.1ppK
Accuracy: 0.4% of full scale at 25°C |
|
|
|
|
Temperature (compensation): |
0 to 100 °C, auto or manual |
|
|
|
| Display: |
12 x 2 Char. alphanumeric with full-text prompts, error
messages |
|
|
|
|
Battery Saver Function: |
On Off after 5 min of no use.
Off On continuously |
|
|
|
|
Dimensions: |
152 L x 82 H x 33 D mm |
|
|
|
|
Protection: |
IP65:case IP65: connector |
|
|
|
|
