Aqua-DP

Aqua - DP
pH/Dissolved Oxygen & Temperature Meter

TPS Aqua -CP Cond/TDS/pH/Temp Meter

FEATURES

  • Waterproof to IP65
  • Will float if dropped into water
  • Simultaneous readout of all parameters
  • One-touch calibration
  • Battery saver function
  • Full-text prompts and error messages

Ordering Information
Sales Index  
Water Quality Instruments  

Related Products:
TPS Aqua-pH

TPS Aqua - D

The Aqua-DP is a waterproof, easy-to-use, Dissolved Oxygen, pH and Temperature meter.

It provides accurate, reliable measurements, and is very easy to use. Genuine one-touch calibration puts an end to time-consuming calibration procedures.

Rugged and Reliable
Using the latest microprocessor electronics to totally eliminate all internal and external adjustments. The result is a dramatic increase in reliability. The unit is ideal for field or factory use.
The Dissolved Oxygen and pH sensors are designed for maximum durability in field and factory environments.

24 Character Alphanumeric Display
The two-line, 24 character display shows the Dissolved Oxygen plus pH readings simultaneously. Alternatively, a Large Digit mode is available. This shows one reading at a time at almost double the size. To simply use of the Aqua-DP, plain English prompts and error messages are provided. There are no codes to interpret like some other brands.

One-touch Calibration
Calibration of the Aqua-DP could not be simpler.
Just place the sensor into the relevant standard and press the Calibrate key. That's all there is to it !
The Aqua-DP displays sensor condition after calibration has been completed, allowing for preventative maintenance.
All calibration information is stored in memory when the Aqua-DP is switched off, even if the battery is removed.

Salinity Correction
Salinity correction for ppM Dissolved Oxygen readings is a breeze. Simply enter the Salinity value and the Aqua-DP does the rest !

Low Battery Drain
The Aqua-DP will provide in excess of 70 hours of continuous use with an alkaline 9 volt battery.
A handy battery-saver function switches the Aqua-DP off after 5 minutes if no keys have been pressed. This function can also be disabled for continuous operation.

Temperature Compensation
Correct temperature compensation is vital for accurate Dissolved Oxygen measurements. The Aqua-DP compensates for membrane permeability for all readings and also for Dissolved Oxygen solubility in ppM mode.
Temperature compensation for pH probe performance is also fully automatic.

Specifications:

ppm Dissolved Oxygen:

Range: 0.0 to 25.0ppm
Resolution: 0.1ppm
Accuracy: +0.1ppm

pH:

Range: 0 to 14 pH
Resolution: 0.01 pH, 1 mV
Accuracy: +/-0.01pH; +/-1 mV

% Saturation Dissolved Oxygen:

Range: 0 to 250.0%
Resolution: 0.1%
Accuracy: + 0.3%

Temperature (auto - compensation):

Range: -10.0 to 50°C
Resolution: 0.1°C
Accuracy: + 0.2°C

Display:

12 x 2 Char. alphanumeric with full-text prompts, error messages

Battery Saver Function:

On Off after 5 min of no use.
Off On continuously

Dimensions:

152 L x 82 H x 33 D mm

Protection:

IP65:case IP65: connector

 

Ordering Information / Price Request Form
Select the items for which you'd like a price by checking the boxes, then fill in your contact details and submit the form
     
123152 Aqua DO/pH/Temp Meter Includes 9V Battery, Handbook. Order pH and DO sensors separately. See Aqua DO meter for ED1 probe ordering details. See Aqua pH meter for pH probe options.
Name*
Company
Address line 1
Address line 2
City*
State
Post Code / Zip
Country*
Phone
Email*
Comments
     
   

 

 


A division of Biolab (Aust) Pty Ltd
Privacy | Disclaimer | Trademarks | Contact

Copyright Biolab (Aust) Pty Ltd 2007