Aqua-pH |
|
TPS Aqua pH - mV & Temperature Meters |
|
|
|
The Australian Made
Aqua pH is a NEW economical, waterproof handheld pH, mV and Temperature
meter.
It provides accurate, reliable measurements, and is very easy to use.
Genuine one-touch calibration puts an end to time-consuming calibration
procedures.
The Aqua pH comes with all the accessories needed for immediate use.
Additional options such as a hard carry case are also available.
Rugged & Waterproof
Tough enclosure fully waterproof to an IP65 rating
and the connectors, IP65. Designed for the harshest field and industrial
environment.
One-touch Calibration
Calibration of the Aqua pH could not be simpler.
Just place the pH electrode into any of the pre-selected buffers and press
the Calibrate key.
Low Battery Drain
The Aqua pH will provide in excess of 100 hours of
continuous use with an alkaline 9 volt battery. A battery-saver function
switches the Aqua pH off after 5 minutes.
|
|
|
|
| Specifications: |
|
|
|
| pH / mV Range:
|
0 to 14 pH; 0 to +1500mV
|
|
|
|
| Resolution: |
0.01 pH, 1 mV |
|
|
|
| Accuracy: |
+/-0.01pH; +/-1 mV |
|
|
|
|
Temperature: |
Range: -10 to 120 °C
Resolution: 0.1 °C
Accuracy: +/-0.2 °C |
|
|
|
| Temperature Comp: |
0 to 100 °C, automatic or manual. automatically detects
whether or not the temp sensor is connected. |
|
|
|
| Display: |
12x2 Character alphanumeric with full- text prompts and
error messages. |
|
|
|
| Battery Saver
Function: |
On: Switches off after 5 minutes of no use.
Off: Remains on continuously |
|
|
|
| Power: |
9V Alkaline battery for 100+ hours |
|
|
|
| Protection: |
IP65 (case) IP65 (connectors) |
|
|
|
|
