|
FB Series Well Covers
Bolt Down Lid
Setting new standards in environmental
well covers
EnviroEquip
introduces a new range of well covers for monitoring wells. Providing a professional
finish to your wells.
The FB Series Bolt Down Covers meet test loads as specified
by the Australian Standard AS3996 Classes D and E.
Available in three sizes to
meet all your well head requirements.
Features
- Designed to meet the USA API 1615 recommendation for well
covers
- O-Ring seal for leak resistance
- Stainless Steel bolts. Bolt down for tamper resistance
Socket head cap screws require as Allen Wrench to undo the bolts. An added security
feature.
- Nylon Washers.
- 75 mm Black triangle warning symbol with “Warning
Monitoring Well. Do Not Fill” cast into the lid
- Black Triangle with White background on lid.
- Clear Identification of an environmental
well
- International recognition
- Leak resistant
- Added Security with bolts
- Load tested to Australian Standards
- Extra Security with Socket head cap screw
bolts
Load Testing
The testing was performed by an independent testing laboratory in Victoria Australia. Each of the FB200 and FB300 well cover lids was loaded in a test frame to a load of Class D of 210 kN and then up to a load for Class E of 400 kN. After the load was removed both covers were still intact with no signs of any fractures. Copies of the test results can be provided upon request.
Note: The smaller FB180 was not tested as due to its smaller size, it is unlikely this will fail given that the larger covers did not fail.
Related Products
Links
|
