QED Skimmers

SOS & SPG Skimmers for Product Recovery Pumps

SPG Skimmer

 

BENEFITS

Fits QED Bladder Pumps such as Genie and PP2
Proven reliable
Intrinsically Safe
Recovers product down to a sheen


Sales Index
Remediation Equipment

EnviroEquip Preferred Installers

Related Products:
Genie Bladder Pumps

 

 

 

_ There are two main types of skimmer technologies, available as a quick connect attachment, for QED remediation bladder pumps such as the Genie:
Selective Oil Skimmers (SOS) and Specific Gravity Skimmers (SPG). To help determine which skimmer is the better fit given the unique attributes associated with each site and the hydrocarbons present, the following are some general guidelines and rules to follow.

 

SOS Skimmer Head

Selective Oil Skimmer (SOS)
The Selective Oil Skimmer (SOS) should be used under the following conditions:

  • The product has a low viscosity, such as gasoline, diesel, and jet fuels (< 200 centistokes)
  • If product needs to be removed to a sheen (= 0.25 mm).
   
SPG Skimmer Head

Specific Gravity Skimmer (SPG)
The Specific Gravity Skimmer (SPG) is extremely durable and removes high volumes of free-floating product when a 25 mm product layer or greater is present. This skimmer should be used under any combination of the following conditions:

  • The product is viscous (200-1000 centistokes)
  • Hydrocarbon has a specific gravity of 0.85 or less
  • Large quantities of product exist or well recharge rates are high
  • Water drawdown is desired in a 50 mm well.
Selection Criteria SOS SPG
Viscosity (Centistokes) 1 - 200 1 - 1000
Specific Gravity (SpG) < 1.0  < = 0.85
Product Quantity / Lense Thickness Small to Large Large
Final Product Lense Thickness < = 0.25 mm 25 mm
Maximum Flow Rate 2650 lpd 8160 lpd
Specifications
SOS Skimmer Specifications SOS-2S  SOS-2Tidal SOS-4S SOS-4Tidal
Float Range 330 mm 1000 mm 760 mm 1300 mm
Total Length, Extended 1240 mm 2610 mm 1500 mm 2570 mm
Diameters 46 mm 46 mm 96 mm 96 mm
Minimum Water Required 760 mm 1470 mm 760 mm 1140 mm
Type Hydrophobic screen inlet, replaceable element
Attaches to Bladder pump or above ground diaphragm pump
Contain upper and lower central locating guides to keep skimmer float free from wedging against the bore casing wall
Maximum Flow rates 380 lpd on 60 cm long bladder pump 600 lpd on 60 cm long bladder pump
Options High water sensor to shut pump down if water level in well rises over float

A division of Biolab (Aust) Pty Ltd
Privacy | Disclaimer | Trademarks | Contact

Copyright Biolab (Aust) Pty Ltd 2007