|
|
|
|
|
| |
|
|
|
QED
MicroPurge® basicsTM
MP15 Sample
Pack |
| The ultimate in control and power for dedicated low-flow sampling. |
|
|
|
The MP15 MicroPurge®
basicsTM Sample Pack combines advanced low-flow control with the quiet power of a built-in compressed gas source, for the ultimate in portability and ease of use.
The simplified flow and drawdown control features of basics control are housed in a
moulded case along with a lightweight CO2 cylinder, putting everything you need to operate a bladder pump into one easily portable unit.
A standard padded nylon case protects the MP15 in transport, provides
over-the-shoulder on-site |
|
| |
carrying
convenience, and even has a hook on the back to let you hang it from the
well casing during sampling.
The MP15 also includes a bypass fitting, so you can now use one handy unit to sample from both hard to reach wells and from wells accessible with larger gas cylinders and/or compressors. The MP15 has the power you want in an easy to carry package.
Portable power to sample any well
Backpack portability makes the MP15 a powerful tool for faster, more efficient sampling at remote sites. With alternate air supply fitting, it also works great at closer wells. Remote wells and inaccessible sites are no problem with the unique, new MP15 Control & Power Pack. The convenient carrying case combines a compact compressed gas cylinder with the advanced control of MicroPurge® basics Controllers.
With this combination, a complete sampling setup can be carried by a single person, to reach wells where trucks or even compressor carts can’t go. |
|
|
|
|
|
|
|
|
|
The 2.3 kg CO2 cylinder provides hours of sampling power, and is easily refilled. But the MP15 isn’t just for remote wells. Its built-in bypass fitting allows it to be used with larger cylinders or other gas sources, extending your range even more.
Simple, stable, repeatable flow rate setting
The MicroPurge® basics Controller’s six-button keypad is your gateway to the control and power of the most advanced low-flow sampling system ever made. With remarkable ease, you will achieve precise, stable control of low pumping rates, quickly and repeatably, from one sampling event to the next.
QED’s third-generation engineering takes advantage of the opportunity for downsized equipment, which is lighter and more portable, reduces equipment cost and increases sampling crew productivity. Simplified, sealed electronics are put together in a design that delivers famous QED durability and value.
MicroPurge® basics controllers can be connected to the MP30 Drawdown Meter for optional Automatic Drawdown Control, an industry first.
|
|
| |
|
|
|
|
|
|
MP15
Controller face (click to enlarge) |
|
Multi-mode digital control...
- The MicroPurge® basics Controller gives you three easy-to-use operating modes, to cover every sampling protocol and situation.
- MicroPurge® Mode easily adjusts low flow rates with “faster/slower” arrow keys to reach desired rates. You don’t have to worry about calculating pump cycles or refill and discharge times.
- ID Mode instantly recalls optimized settings previously established for each well, providing precise, consistent performance from event to event.
- User Set (MN) Mode provides manual control of pump operation for extreme depths and other special cases.
|
|
MicroPurge®
basics MP15 Control & Power Pack Advantages...
- All the advanced MicroPurge® control capabilities of basics controllers, plus a lightweight, built-in CO2 source for ultimate portable control and power.
- Exclusive MicroPurge® control mode uses simple arrow keys to adjust low-flow rates easily and repeatably, using a microprocessor to re-create flow adjustment strategies used by experienced samplers.
- The MP15 weighs just 12.5kg. with a full cylinder in its padded nylon field case. Backpack carrying leaves hands free for other sampling equipment.
- Also includes capability for optional drawdown control with link to the MP30 Drawdown Meter.
- Lightweight, silent drive power: 3.5 hours of purging capacity at 22 m pump depth! A high quality CO2 regulator is included, along with a cylinder change wrench: field ready!
- The MP15 includes a quick-connect bypass fitting so other compressed gas sources can also be used, for maximum versatility.
MicroPurge System Diagram
The MicroPurge Groundwater Sampling System has been designed for complete integration of the MP10 Digital Groundwater Sampling Controller and its gas power source, MP20 Flow Cell and MP30 Drawdown & Water Level Meter. The diagram below shows a complete MicroPurge Groundwater Sampling System with the MP10 Digital Controller driving the sampling pump.
Move your mouse over the components of the groundwater sampling system below to learn more about each component of the MicroPurge System.
|
|
System
Specifications:
| Model
No. |
MP15 |
| Dimensions |
25-1/2"x12-1/2"x10"
(65x32x25 cm) |
| Weight |
27 lbs (12 kg) |
| Case
Material |
Polyethylene |
| Carry
Bag |
Standard |
| Back
Pack Straps |
Optional |
| Keypad |
6 Keys |
| Display |
2 Line, 16 Character / LCD Display |
| Power |
3 "AA" batteries |
| Battery
Life |
50,000 Cycles @ 70°F (21°C) |
| Max.
Pressure |
120 PSI (8,275 kPa) |
| Max.
Pump Depth |
250 Feet (76 m) |
| Operating
Temperature |
-20 - 150°F (-29 - 66°C) |
| Cylinder: |
5 lbs (2.3 kg)CO2 |
| Cylinder
Life: |
Over 3 hours at 75 foot pump depth |
| Connection
to MP30 Drawdown Meter |
heavy-duty cable (supplied with
MP30) |
MP15 Purge Capacity*
| Pump Depth (ft) |
Purge Time (min) |
| 50 |
400 |
| 100 |
120 |
| 150 |
90 |
| 200 |
50 |
| *Purge times based on
200 ml/min flow rate, full 5 lb. CO2 cylinder |
|
|
|
