QED MicroPurge^® basics^{TM MP30 Drawdown Water Level Meter}

Automatic protection against excessive purging
The MP30 Drawdown/Water Level Meter is unique. With its link to the basics Controller for automatic drawdown control, you’ll never have to worry about over-purging a monitoring well again.
By constantly keeping track of well level for you, the MP30 removes one of the variables that can make low-flow sampling a challenge. Even if distractions occur, you’ll have the confidence of knowing that the well will not be pumped down to excessive drawdown levels that could compromise your sample integrity.

If drawdown reaches the probe, the level shutoff light and buzzer are activated. The linked controller halts pump cycling until the well recovers and reaches the probe; then pumping resumes automatically.

• Provides unique MicroPurge® Automatic Drawdown Control. Cable link to basics controller puts pumping on standby mode until the well recovers — automatically!
• MicroPurge® drawdown mode includes light and buzzer indicators to alert sampling personnel when the selected maximum drawdown point has been reached.
• Standard water level mode includes conventional probe submergence light and buzzer indicators.
• Available with 45 or 90 m chemical resistant polyethylene-coated tape.
• Compact 5/8" (16 mm) diameter probe fits narrow or crowded well casings.