QED MicroPurge® Well Wizard Bladder Pumps

  The low-flow sampling standard.

  The heart of every low flow groundwater monitoring system is the sampling device. For the system to do its job properly, the sampling device must:
  • Run reliably even at low rates (100 ml/min or less) over a wide range of conditions;
  • Operate gently without increasing turbidity or altering samples;
  • Deliver reliable performance for many years without needing frequent repairs or maintenance.

MicroPurge Menu

MicroPurge basics components
MP10 Controller
MP40 Compressor
MP15 Power & Control Pack
MP20 Flow Cell
MP30 Drawdown Meter
Well Wizard Bladder Pumps
QED Sample Pro

Micropurge / Low-Flow Sampling Resource Page 
Low-Flow Procedure with QED basics equipment (456kb)
Portable MicroPurge® Sampling Equipment Catalog - 916kb 

Sales Index
Groundwater Pumps Index
 

Landfill Monitoring Products
  
Groundwater Sampling Products

 
  For nearly 16 years, Well Wizard pumps from QED have been doing all this...at more sites...for more users...than any other system.

The Most Complete Low Flow Pump Selection
MicroPurge® system pumps come in an unsurpassed range of sizes, materials, and capabilities, including models for deep wells, narrow or obstructed casings, and small-volume pumps for low-yield wells. Together with MicroPurge® controllers, flow cells, and accessories, they create the most reliable, cost-effective low-flow system available.

Field proven pump designs and exclusive, high performance PTFE bladder formulation offer the reliability critical to long-term monitoring. QED was first in the industry with a standard 10-year sampling pump warranty "no-loopholes" protection that covers the entire pump, including the bladder.

       
Required accessories for a complete well sampling project
  • Pump bottom intake screen to prevent grit entering the bladder
  • Pump controller to automatically cycle air on and off to the bladder pump
  • Compressed air supply, either from compressors or bottled gas
  • Tubing for air supply and water discharge
  • Well cap for dedicated situations
  • Water quality meter with flow cell to monitor parameter stabilisation

MICROPURGE® PUMP SPECIFICATIONS
Economic Popular Choice
Premium Popular Choice
Model No.
Pump
Length O.D. Fitting *Tubing Size Vol Max. Lift
Materials
feet(m)
inches(cm)
Material inches(mm) (ml) feet(m)
QT1100M
Teflon
3.3 (1.0) 1.66 (4.2) Teflon 1/4 & 3/8 (6 & 9) 395 250 (75)
QP1101M
PVC
3.4 (1.04) 1.66 (4.2) Polypropylene 1/4 & 3/8 (6 & 9) 395 300 (90)
QP1101HM
PVC
3.3 (1.0) 1.66 (4.2) Stainless Steel 1/4 & 3/8 (6 & 9) 395 600 (180)
QST1101PM
316 S.S.
3.4 (1.04) 1.66 (4.2) Stainless Steel 1/4 & 3/8 (6 & 9) 395 1,000 (305)
QT1200M
316 S.S. and Teflon
3.4 (1.04) 1.50 (3.8) Stainless Steel 1/4 & 3/8 (6 & 9) 495 300 (90)
QT1250
316 S.S.
1.25 (0.38) 1.50 (3.8) Stainless Steel 1/4 & 1/4 (6 & 6) 100 300 (90)
QP1150
PVC, Teflon
1.63 (0.51) 1.66 (4.2) Polypropylene 1/4 & 1/4 (6 & 6) 130 300 (90)
QT1300
316 S.S. and Teflon
3.8 (1.16) 1.00 (2.5) Stainless Steel 1/4 & 3/8 (6 & 9) 220 300 (90)
* To choose 1/2" (13 mm) rather than 3/8" (9 mm) discharge tube option, delete suffix M from pump model number.

Materials Specifications
Stainless Steel: Type 316 electropolished
PVC: NSF-grade, extruded specifically for QED with no markings or lubricants.
Teflon (pumps): duPont Teflon® and other premium PTFE resins
Teflon (bladders): Q-flex exclusive 200,000 cycle rated PTFE.
Teflon is a registered duPont trademark.

Intake Screen Specifications
Model No. Material Screen Size Fits Pump Model(s)
Q35200 Stainless Steel 0.01" (0.25 mm) mesh QT1200, QT1250
Q37789 PVC .010" (0.25 mm) slot QP1101, QP1101H
Q37727 PVC .010" (0.25 mm) slot QP1250 (also QP1101, QP1101H)
Q37733 Teflon .010" (0.25 mm) slot QT1100
Note: Pump models QST1101P, QT1300 include intake screens. Screens are optional on other pump models, but are required for full 10-year warranty coverage.

 

A division of Biolab (Aust) Pty Ltd
Privacy | Disclaimer | Trademarks | Contact

Copyright Biolab (Aust) Pty Ltd 2007