|
Solinst® 101
Water Level Meter
The level has been raised!
The Solinst® Model 101 Water
Level Meter has been the groundwater industry standard for years. Now a
newly improved reel has raised the standard again. Solinst has listened to
their customers over the years, and incorporated 15 design improvements
including:
- Easy access battery
drawer
- Enhanced ergonomics
- Simple electronics removal
- Tape guide/datum
included
- Very rugged meter
- 2 different probe options
- Loud buzzer & bright lamp
- Tapes up to 900m
Operating Principles
The Model 101 Water Level Meter uses
a well designed probe, attached to a permanently marked polyethylene tape,
fitted on a well-balanced reel. The conductors embedded within the tape each
have seven strands of stainless steel.
The probe incorporates an
insulating gap between electrodes. When contact is made with water, the
circuit is completed, sending a signal back to the reel. This activates a
loud buzzer, and a light.
The water level is then
determined by taking a reading directly from the tape, at the top of the
well casing or borehole. Use of a tape guide gives extra accuracy and
protects the tape.
The high quality storage and
winding reel has a convenient carrying handle, a brake, and a sturdy,
stand-alone design. Standard controls include a battery test button, on/off
switch and an internal sensitivity adjustment.
Model 101 Probe
The new P6 probe is designed to reduce or eliminate problems with
cascading water.
P6 Stainless Steel: submersible with windowed
centre probe for reliable detection.
0.5" dia. by 7.5" long ( 12.7 mm x 190 mm).
|
