|
|
|
|
|
Re-usable
Teflon Bailers
|
|
Teflon
Bailers for sampling with the best integrity. |
|
|
|
Monoflex Teflon bailers
are suitable for sampling virtually any potential contaminant without changing collected
sample’s integrity. Available in the following types:
- White Teflon Bailers - Regular
- White Teflon Bailers - Customised
Monoflex White Teflon Bailers -
Regular
The Regular White Teflon Bailer has an Open Top and a single check valve at the bottom.
Suited for purging and sampling of monitoring wells, when you do not need to see
inside the bailer.
|
 |
|
Bottom Emptying Devices
Monoflex provides bottom emptying devices (with or without tap) to allow emptying of the
bailer contents through the lower ball check without loss or contamination. The tap is
useful if the sampling program requires multiple small sample containers to be filled. The
devices are made of Teflon or PVC in
sizes to fit Monoflex Bailers.
|
 |
|
Jensen Bailers
The Jensen Bailers are extruded
from high density Teflon to produce a thick walled, sturdy and durable
bailer which will endure years of use at an economical price. They are also
designed with interchangeable parts.
Customise your bailer
Choose a top, a tube, and a
bottom separately to customise each bailer, or just pick one of our
pre-assembled Complete Bailers.
(A) Standard Side Opening Top has 'V' notch opening for accurate
pouring, round thread for easy cleaning and chafe guard for wear and
abrasion protection.
(B) Point Sampling (or Source) Top is similar to the Standard Top but
has an added check valve that closes during sample retrieval to isolate
samples taken at specific depths.
(C) Standard Bottom with pin over ball
(F) Bailer Bodies are transparent for easy viewing of contents and
come in two lengths. Bailer capacity can be increased by adding extension
sections and couplings.
(G) Controlled Flow Bottom Emptying Assembly controls the flow rate
from a slow drip to a rapid emptying flow, minimising agitation, aeration
and exposure to air. Can be attached directly to sample container.
|
|
Ordering Information |
|
Monoflex
White Teflon Bailers - Regular |
| TO163 |
Standard White Teflon Bailer 42mm
x 0.9m |
| TO162 |
Standard White Teflon Bailer 42mm
x 0.6m |
| TO161 |
Standard White Teflon Bailer 42mm
x 0.3m |
|
Monoflex
Teflon Bottom Emptying Devices |
| TB07 |
Bottom Emptying Device without
tap, Teflon (for 20mm bailers) |
| TTB07 |
Bottom Emptying Device with tap,
Teflon (for 20mm bailers) |
| TB16 |
Bottom Emptying Device without
tap, Teflon (for 42mm bailers) |
| TTB16 |
Bottom Emptying
Device with tap, Teflon (for 42mm bailers) |
|
Jensen Bailers |
| NORAFC |
Standard Bailer
complete 42mm diameter, 1,100mm long - 1,050cc |
| NORAFG |
Standard Bailer
Controlled Flow Bottom complete 42mm diameter, 1,100mm long - 1,050cc |
| NORBFC |
Standard Teflon
Point Source Bailer complete 42mm diameter, 1,100mm long - 1,050cc |
| NOR3011 |
(A) Standard Teflon
Top |
| NOR3221 |
(B) Teflon Point
Sample (or Source) Top |
| NOR3015 |
(F) Teflon
Extension Tube 90cm - 1,050cc |
| NOR3214 |
(C) Standard Teflon
Bottom w/pin |
| NOR3219 |
(G) Controlled Flow
Bottom |
TeflonŽ is a registered trademark of DuPont
Dow Elastomers
|
